TestCoverage Status

gofigure

Gofigure is a configuration tool for node to help in the gathering and monitoring of configuration files in node.

Installation

npm install gofigure

Usage

Loading configurations

Gofigure currently handles the loading of JSON files for configurations.

To Get an instance of a configuration object use the gofigure method. The gofigure method takes an object that accepts the following options

const gofigure = require('gofigure');

Load configurations from a directory

//Loader for directory of configurations
const loader = gofigure({
  locations : [path.resolve(__dirname, 'configs')]
});

Load configurations from a files.

const loader = gofigure({
  locations : [path.resolve(process.env.HOME, 'configs/config1.json'), path.resolve(__dirname, 'config1.json')]
});

You can load configurations asynchronously

loader.load().then((config) => {
    const { PORT, HOST } = config;
});

or synchronously

const loader = gofigure({locations : [path.resolve(__dirname, 'configs')]});
const config = loader.loadSync();

Directories of configurations

To load directories that contain configuration files in the options object provide locations property that is an array of directories than contain your configurations.


const gofigure = require('gofigure');

const loader = gofigure({ locations : [ path.resolve(__dirname, 'configs') ] });
loader.load().then((config) => {
    const { PORT, HOST } = config;
});

The order of the locations matter as it defines a precedence for files. For example suppose you have a directory of default configuration files, and on production you want to override those configuration with environment specific configurations with out changing your module or source controlled files.

const gofigure = require('gofigure');

const loader = gofigure({ locations : [ '/prod/confgis', path.resolve(__dirname, 'configs') ] });
loader.load().then((config) => {
    const { PORT, HOST } = config;
});

Here any production configuration files found in /prod/configs will override the properties in path.resolve(__dirname, 'configs').

Another use case might be in development where you have default properties and instead of altering the source controlled files the developer can override them by putting them in their home directory.

const gofigure = require('gofigure');
const HOME = process.env.HOME;

const loader = gofigure({ locations : [ path.resolve(HOME, 'yourApp/configs'), path.resolve(__dirname, 'configs') ] });
loader.load().then((config) => {
    const { PORT, HOST } = config;
});

Files

You may also load specific files rather than entire directories.

const gofigure = require('gofigure');

const loader = gofigure({ locations : [ '/prod/configs/config1.json', path.resolve(__dirname, 'config1.json') ] });
loader.load().then((config) => {
    const { PORT, HOST } = config;
});

Again order matters /prod/configs/config1.json will override path.resolve(__dirname, '/config.json')

Monitoring

Gofigure supports the monitoring of changes to configuration files.

All files

To enable monitoring you can specify monitor to true in the options.

const gofigure = require('gofigure');

const loader = gofigure({
    monitor : true, 
    locations : [ 
        '/prod/configs/config1.json', 
        path.resolve(__dirname , '/config.json'),
    ],
});
const config = loader.loadSync();

loader.on('my.cool.property', (newValue) => {
  //the property has changed do something with it
});

Individual Files

To monitor certain files you can use the files property and with object that have a monitor : true KV pair.

const path = require('path');
const gofigure = require('gofigure');

const loader = gofigure({locations : [
  {
    file : '/prod/configs/config1.json',
    monitor : true

  },
  path.resolve(__dirname, 'config.json')
]});
const config = loader.loadSync();

loader.on('my.cool.property', (newValue) => {
  //...do something
});

Just config1.json will be monitored for changes.

Property topic syntax

To listen to all properties

loader.on((config) => {
  //...do something
});

loader.on((nameOfPropertyChanged, config) => {
  //...do something
});

loader.on((nameOfPropertyChanged, value, config) => {
  //...do something
});

To listen to specific properties

loader.on('my.cool.property', (newValue) => {
  //...do something
});

loader.on('my.cool.property', (newValue, config) => {
  //...do something
});

loader.on('my.cool.property', (nameOfPropertyChanged, value, config) => {
  //...do something
});

Wild cards


//listen to any property changed on the my.cool object
loader.on("my.cool.*", (propName, newValue) => {
  //...do something
});


//listen to the change of a property named 'property' on any object
//that is a member of my
loader.on("my.*.property", (propName, newValue) => {
  //...do something
});

//listen to the change of a property named 'property' that is
//a member of a property called cool
loader.on("*.cool.property", (propName, newValue) => {
  //...do something
});

//listen to the change of property or otherProperty on the my.cool object.
loader.on("my.cool.{property|otherProperty}", (propName, newValue) => {
  //...do something
});

//listen to the change of property or otherProperty on the my cool or
//notCool object.
loader.on("my.{cool|notCool}.{property|otherProperty}", (propName, newValue) => {
  //...do something
});

Callback Arguments

The property change callback will pass in the following values depending on the arity of the callback.

If 1 argument is expected then just the callback invoked with the new value is a.

loader.on('my.cool.property', (newValue) => {
  //...do something
});

If two arguments are expected then it is invoked with the property name and the new value.

loader.on('my.cool.property', (propName, newValue) => {
  //...do something
});

Other wise the callback is invoked with the propertyName, newValue and the configuration object.

loader.on('my.cool.property', (propName, newValue, configObject) => {
  //...do something
});

Environment Variables

gofigure supports the replacement of environment variables in the configurations usings the following syntax.

You can use $$ if you want to ignore a substitution $${SOME_VALUE}.

Example

Given the following config

{
    "a": "${ENV_VAR_A}",
    "b" : {
        "c": "${ENV_VAR_B:-b.c}" 
    },
    "arr": ["${ARR_INDEX_0}", "${ARR_INDEX_1}"],
    "arrWithObjects": [
        { "value": "${ARR_INDEX_0}" },
        { "value": "${ARR_INDEX_1}" }
    ]
}

And the following environemnt

ENV_VAR_A=a
ENV_VAR_B=
ARR_INDEX_0=zero
ARR_INDEX_1=one

Would produce

{
    "a": "a",
    "b" : {
        "c": "b.c" 
    },
    "arr": ["zero", "one"],
    "arrWithObjects": [
        { "value": "zero" },
        { "value": "one" }
    ]
}

##Environments

Reserved Property Names

The following environment names are reserved and not be used when process.env.NODE_ENV or environment is set.

NODE_ENV

gofigure also supports environments, by default it will look for NODE_ENV and if it is set then it will use it.

The following is an example configuration file


{
    "development": {
        "logging":{
            "level": "DEBUG"
        },
        "app" : {
          "host" : "localhost",
          "port" : "8088"
        },
        "MYSQL_DB" : "mysql://test:testpass@localhost:3306/db",
        "MONGO_DB" : "mongodb://test:testpass@localhost:27017/db"
    },
    "production": {
        "logging":{
            "level": "ERROR"
        },
        "app" : {
          "host" : "prod.mydomain.com",
          "port" : "80"
        },
        "MYSQL_DB" : "mysql://test:testpass@prod.mydomain.com:3306/prod_db",
        "MONGO_DB" : "mongodb://test:testpass@prod.mydomain.com:27017/prd_db"
    },
    "test": {
        "logging":{
            "level": "WARN"
        },
        "app" : {
          "host" : "test.mydomain.com",
          "port" : "80"
        },
        "MYSQL_DB" : "mysql://test:testpass@test.mydomain.com:3306/test_db",
        "MONGO_DB" : "mongodb://test:testpass@test.mydomain.com:27017/test_db"
    }
}

To load just the development properties set the environment to development.


const gofigure = require('gofigure');

const loader = gofigure({
  files : [__dirname + "/config-env.json"],
  environment : "development"
});

loader.on("MYSQL_DB", (uri) => {
    //connect to database
});

loader.on("MONGO_DB", (uri) => {
    //connect to mongo
})

loader.on("logging", (logging) => {
    //set up logging
})

loader.on("app", (app) => {
    //set up your app
});

loader.load.then((config) => {
    //use your config
});

You may also share properties across environments by using * or overriding defaultEnvironment when initializing.


{
    "*": {
         "logging": {
            "level": "DEBUG"            
        },
        "app" : {
            "host" : "0.0.0.0",
            "port" : "8088"
        },
        "MYSQL_DB" : "mysql://test:testpass@localhost:3306/db",
        "MONGO_DB" : "mongodb://test:testpass@localhost:27017/db"
    },
    "production": {
        "app" : {
            "port" : "80"
        },
        "MYSQL_DB" : "mysql://test:testpass@prod.mydomain.com:3306/prod_db",
        "MONGO_DB" : "mongodb://test:testpass@prod.mydomain.com:27017/prd_db"
    },
    "test": {
        "app" : {
          "port" : "80"
        },
        "MYSQL_DB" : "mysql://test:testpass@test.mydomain.com:3306/test_db",
        "MONGO_DB" : "mongodb://test:testpass@test.mydomain.com:27017/test_db"
    }
}

Now each environment only has to override properties specific to that env.

##NODE_TYPE

NOTE This is to used with NODE_ENV.

NODE_TYPE allows you to change configurations based on the type of app instance (node).

For example in production you could put your common configurations in the production section of the config. And then add additional configurations under a webapp and workerQueue config.

For example you could have have a config that looks like the following.

{
    "production": {
        "dbHost": "prod-db"
    },
    "development": {
        "dbHost": "localhost"
    },
    
    "type":{
        "production": {
            "webapp": {
                "port": 80
            },
            "workerQueue": {
                "amqpHost": "msgs",
                "numberOfWorkers": 8
            }
        },
        "development": {
            "webapp": {
                "port": 8080
            },
            "workerQueue": {
                "amqpHost": "localhost",
                "numberOfWorkers": 1
            }
        }
    }
}

If NODE_ENV=production and NODE_TYPE=webapp your config would

const loader = gofigure({ locations : [ 'path/to/config' ] });

const config = loader.loadSync();

console.log(config);

Your config would look like the following.

{
    "dbHost": "prod-db",
    "port": 80
}

Alternatively if NODE_ENV=production and NODE_TYPE=workerQueue your config would be.

{
    "dbHost": "prod-db",
    "amqpHost": "msgs",
    "numberOfWorkers": 8
}

NODE_ENV=development and NODE_TYPE=webapp your config would be.

{
    "dbHost": "localhost",
    "port": 8080 
}

NODE_ENV=development and NODE_TYPE=workerQueue your config would be.

{
    "dbHost": "localhost",
    "amqpHost": "localhost",
    "numberOfWorkers": 1 
}

License

MIT https://github.com/C2FO/gofigure/raw/master/LICENSE

Meta